STK1160 based devices are supported (video and audio) under Linux by the easycap kernel module (kernel 2.6.38 and later) and further on by the stk1160 kernel module (kernel 3.7). More information on this wiki: Stk1160
I ordered EasyCap, but it does not work on windows 10. I found driver for windows 10 online, but it didn't work. Someone knows how could I solve this problem? The device is recognized as an audio device also after I installed the driver.Thank you very much.
Easycap Driver Usbtv007
There are many different versions of hardware sold under the name of "EasyCAP". Some do not store the required firmware in EEPROM but expect the driver to feed the firmware into the USB hardware when inserted. The Somagic 1c88:0007 is one such device (there may be others). Once the firmware is loaded, the device ID changes to 1c88:003c.
Windows 10 1803's Device Manager shows it under Other devices > Unknown device > Details tab > Device instance path> Value = USB\VID_1C88&PID_0007\SMBL007. Events tab will list entries such as:Device not migratedDevice installed (smiusbgrabber3f.inf_...Info:Driver Management concluded the process to install driver smiusbgrabber3f.inf_amd64_62fdac16904230b7 for Device Instance ID USB\VID_1C88&PID_0007\SMBL007 with the following status: 0xE0000234.
Windows 10 1809 (as of 2018-11-18) did not complain about the digital signature, but it complained about the Widows 95 era *.INF file and not being able to migrate the driver. Perhaps an older version of Windows 10 may work (until Microsoft pushes it to update).
It's not the drivers I finally figured it out. It's the usb cable that comes with it. The usb cable that attaches to it and then you plug the other end to the computer .it is thin and cheaply made. Get your self a top of the line usb cable and you are good to go.I had one lying around my home and tried it and it works great. I thought it was the driver for a long time until it hit me try a quality usb cable. That is it just purchase a quality top of the line usb cable and your good to go. Post if it works for you. Take care
I will host these driver packages as long as I can and mirror them if the server load is too high. Yup we hit the $100 AUD per month billing limit for file hosting, the downloads links are now direct links to Google Drive. If you have a question ask here in the comments as other readers may help you.
the driver stk1160.inf is STK1160 ATV BDA WORK PERFECT ON WIN 10 64, IS VERY IMPORTANT DISABLE DRIVER SIGNATURE, use this command bcdedit /set testsigning off after reboot pc force install manual the driver and good job ?
Hi guys,I was never able to get good quality video out of this so I actually gave up on it. I will be looking for a used home DVD recorder to convert my tapes instead but for those who are still interested this is the only driver that worked for my unit:
For updating drivers, there are several ways. You can go to device manger to update the easycap drivers. Use the hardware id to go to pcidatabase.com to find the model and then go to the official site to download the driver.
Thanks a lot for the tips I solved my problem with windows 10 and EasyCAP_USBVID_1B71&PID_3002_FullCD.zip . I was looking for a solution during a long time. in fact I used to capture with the USB equipment from Magix but in my opinion the movie colours were a little grewish. easycap was much better (Brighter colours). I also met a problem using Easycap the software included in honestech TVR2.5 (included in the fullCD.zip) did not work so I changed it to Cyberlink power director and I obtained good résult. To summerize my solution is:easycapEasyCAP_USBVID_1B71&PID_3002_FullCD.zipWindows 10Cyberlink power directorVery good job here thanks again
On Windows 10 Microsoft uses some compatibly drivers for this device dated from 2006. The screen is blurry, after 3 seconds its gone, after 6 seconds the device just freeze. I tried it on several computers too.
I have a ezcap usb 2.0 (USB\VID_1C88&PID_1001&MI_00\7&3723DE77&0&0000)I tried to load the window 10 drives that came with it, that did not work, then I tried to load driver through device manger ,but got an error windows encountered a problem installing the drivers for your device.So I tried toDisable driver signing enforcement, but still had same problemany ideas from anybody
I have the USB\VID_1B71&PID_3002&REV_0100and not sure which drivers I used, I could check if anyone needs it but all I had to do is check the Camera setting in PC Settings and it worked right away
I bought EZCAP 116 TV to transfer my Hi8 home videos to digital on my computer. No problems setting up and copying . Initially worked and editing was good. My computer crashed twice and the editing files on Arcsoft disappeared. I am still able to digitize the files to my computer but saved on Arcsoft for editing. Tried to reinstall but did not work. can I uninstall the drivers and start all over again. Will this allow me edit the files previously digitized. Can you help.
Thank you! After trying for hours to find a working driver, one of these worked.It may also be of worth to note for others that I discovered a much easier solution using an OTG cable with an Android phone or tablet, if that is an option for you.
Thank you so much for the post, the driver EasyCap-W7-W10-x64 work fine for my easy capture.However, the serial number of SW honestech TVR 2.5 does not correct, so I can not use the application.Do you have any update for this?Anyway, thanks a lot for your artical!
Tried these drivers (and several others including the one that came with the hardware):EasycapDC60_STK1160Grabber_32&64bitUSB-AVCPTSetup_For_Win7.zipEasyCap W7 W10 x64.zipDrivers_SMI_Grabber_26012011.zip
hello , i have same issue with you. pls i need the software and drivers. i formated my pc without backup. i recently noticed that i have lost my software disc. you can reply me via email ikechukwuisaac70@gmail.com
Which driver package from the list should I download to use in a windows 10 environment. The driver and software I received with my Easycap capture device, USB DVR Capture v 4.0A Model No:DC60-007 by honestech is totally useless. The software does not allow us to change the video aspect and as a result we end up with a picture that stretches from top to bottom of screen, but is only about 30cm wide when we try to playback on our bigscreen TV.
Husain Al-Badry, (or anyone else that could help!)I have used the driver you found and I now have no issues in the device manager. I have also downloaded and installed Expression Encoder 4, but I could do with some help. I have the Easycap plugged in, how do I get Encoder to recognise or display it? I have a VCR to connect to my Easycap and wish to save a video for later writing to a DVD
I tried to find a solution for my EasyCAP, I tried every driver out there and spend more than 10h to fix the problem. Finally I could find the driver that worked for my EasyCAP (CSL USB2.0 Video Grabber) under Windows 10. Hope it will work for more people who are still struggling with Windows 10.
Buenas tardes, deseo saber si alguien logro encontrar solución para los drivers en Windows 10 ya que nunca pude hacer darlos ya le quite la verificación de firmas y ni aun asi me funciona. Si alguien logra hacerlos dar, por favor suban el link directamente de los drivers que si funcionaron. Muchas Gracias desde ya.
Good day,I also have the same Easier Cap, and it is detected and accessible in Windows 7 64 bit, and named OEM capture. However, there is no sound from the tape, but it records from the microphone. Video is there. Is there another driver to get the sound from yhe VHS tape working?Renate
I have the software you mentioned (Easier Cap DC60-007 usbtv007) and while it does produce both video and audio without problems, there is still an issue with the picture aspect using this driver. There is no selection for 16.9 aspect and as a result I ended up with good audio, but a picture that while it was the correct hieght, but was only 30cm wide. If I change the aspect ratio, then it records audio only and will not record video. I have read from other sights that Easier Cap DC60-007 usbtv007 does not work correctly with anything above windows 2000. It also states within the help file that it is not compatible with Vista, Win7 or 8.
Hi Guys. My Easycap just stop working after last Windows 10 atualization/update, the driver dont work anymore, and in devices mananger it appears with that yellow exclamation. Any one knows how can I fix it?
Forget about my question! The problem was not the drivers, but the latest update on windows 10 (aug 2016). Somehow the update managed to mess up with driver installation. After taking ownership of three folders related to drivers on system32, I was able to get the easycap working.Thanks a lot, anyway!
Hi Gabriel. My Easycap just stop working after last Windows 10 atualization/update, the driver doesnt work anymore, and in devices mananger it appears with that yellow exclamation. Any Do you know how can I fix it? Where have you download this new driver?
hi guys, the driver is working well. but i need the application. i got honestecc in CD. i want to use ulead but when i tried to use the newest corel video studio, thats not supported. can you give me the best application for windows 10?
Hi, I have this system at home including the software, however with all the building alterations the sleeve of the disk was damaged and now I do not have the serial number for my software as I got a new PC and would like to install it. Is there anyway I can get the serial number without having to buy a whole new set of the easycap as I do not want 2 systems.
after many hours of searching i failed to get this to work but a friend help me out he sent me windows 8 drivers for dc60++ OEM Capture Usbtv007this driver works instantly just install and it comes with a software, just chose the Oem capture as the device in the software.already back up all my old VHS tapes.i want to help others so i upload the filelink: 2ff7e9595c
Comments